1. FPC is automatic feeding, and the receiving tray is divided into NG OK to classify the products after testing; Labeling the tested product effectively distinguishes the test results.
2. Material receiving can be equipped with additional partitions; Alarm in advance when the finished product reaches the set water level upon receipt;
3. The XY dot movement control adopts a Panasonic motor+module+visual detection combination to ensure quality and accuracy.
4. Number of continuous defect alarms. This parameter sets the fixed point continuous defect alarm for the fixture. When the system detects that the electrical testing machine has continuously tested for defects, it will give an alarm, prompting the operator to check whether the test defect is caused by a defect in the testing fixture.
5. Number of retests, this parameter allows the operator to set the number of retests. When there are any test defects, the system will automatically retest and retrieve the final test results based on the number of test results.
6. It is allowed to shake the paper. When using the isolation paper between the product and the product, choose whether to shake the paper based on the hardness of the isolation paper.
Female