1. Humanized operation interface design, simple, intuitive, and convenient operation;
2. &quo; One click” Automatic scanning mode, simple and convenient operation;
3. Scanning process: Different scanning processes can be used according to different types of glass, and different rotational speeds and path modes can be set according to the scanning process, solving difficulties in the production process and improving production yield; Under normal scanning process (6-10 minutes), scratches with a depth (roughness) of 0.01-0.02mm can be removed. If the scratches are too deep, the polishing time needs to be extended (maximum 0.04mm), and defects such as watermarks, stains, meteor showers, and mist can be removed.
4. Automatic compensation for brush wear: automatic compensation based on the brush's service cycle and wear situation;
5. Variable frequency speed regulation: Variable frequency speed regulation of drum brush speed;
Female
6. Vacuum protection: In the event of a sudden power outage or insufficient vacuum negative pressure in the vacuum equipment, the equipment will automatically shut down to prevent glass flying;
7. Overcurrent protection: prevent overcurrent operation and ensure the normal operation of the equipment;
8. Automatic drainage: The equipment has a fully automatic drainage design, which eliminates the need for manual operation and increases work efficiency.
9. Personnel safety protection adopts infrared sensing, and the program can achieve two processing methods: single station and dual station